Caps

Caps

MASONRY AND METAL CHIMNEY CAPS AVAILABLE

Chimneys should be capped for various reasons: keeping the rain out, preventing animals from getting down the chimney, ensuring the proper air flow thru the chimney, keeping sparks from flying out, just to name a few. Before you come in, make sure you know what type of chimney you have, how many flues, and the size of chimney so we can help you to the best of our ability. Note: metal chimneys have multiple walls depending on age and type so take this into account.For masonry (clay tile) chimneys, there are a variety of caps available. They range from the wide selection of metal and painted stainless steel that we stock in our spacious warehouse to stone or clay ones in a variety of shapes that we can easily order from our manufacturers. These caps can fit one per flue. If the chimney has multiple flues, each flue could be capped or one cap over all depending on distance between the flues and the size of the chimney overall. Caps for metal chimneys can be a little more complicated than masonry. Metal chimneys were tested with specific chimney caps, especially fireplaces. Therefore, the best cap is the one designed for that chimney system. The manufacturer and model of the chimney would be needed. This is usually located on the pipe. Measurements of the diameter of the pipes will help.

MASONRY CAPS

Band Around Chimney Cover

Band Around Chimney Cover

Material choices: Aluminum, Stainless steel. Sizes: Custom made. Features:

  • Covers are custom made to fit any chimney
  • Hood overhangs masonry approximately 3" on all sides
  • Attaches securely to chimney with 2.25" draw band
  • Four adjustable corner clamps to provide ample flexible for proper fit
  • Aluminum covers can be built to fit any size chimney. Most recommended for most applications.
  • Stainless steel can be made for sizes up to 38" wind and 86" long
  • 9" braces are standard
  • 12", 15", and 18" braces are available

Big Top Multi-flue cap

Big Top Multi-flue cap

Material choices: Copper, stainless steel, black printed Galvanized Steel. Sizes: Stock sizes available plus custom sized options. Features:

  • 24 gauge metal (copper plated 304 stainless steel, 304 stainless steel, galvanized steel)
  • Available with hinged mounting flanges or non-hinged
  • Copper metal mesh available in 9", 12", and 14" height only
  • Stainless steel and galvanized mesh available in 8", 10", and 14" heights

Lyemance Energy-Saving Damper

Lyemance Energy-Saving Damper

Sizes: 8x8, 9x13, 13x13, 13x18, 17x17, 12' round. Features:

  • Cast iron construction
  • Rubber gasket seals tightly, to help eliminate drafts
  • Mounts to top of chimney
  • 40' cable and handle allows easy operation for opening and closing damper from inside the firebox.

Chim-A-Lator Deluxe top selling damper

Chim-A-Lator Deluxe top selling damper

Sizes: 8 x 13, 13 x 13. Features:

  • 100 % Stainless steel
  • Lifetime warranty
  • Comes fully assembled for fast and easy bolt on installation
  • Spark arrestor
  • Tight seal on top of chimney, keeps heat in when fireplace is not in use.
  • Prevents down draft smoking caused by wind
  • Keeps out animals, birds, insects, bees, rain, leaves, wind and airplane noise
  • 30' cable and handle allows easy operations for opening and closing damper from inside the firebox.

Draft King

Draft King

Material choices: Copper, Stainless Steel, Black painted Galvanized Steel. Sizes: See brochure. Features:

  • 24 gauge metal
  • 18 gauge expanded mesh
  • Expanded metal mesh turned inward at base to allow cover to rest firmly on tile closing any openings around tile
  • Outside band mounting provides greater free air-space for better draft
  • Optional heavy-duty leg kit, Stainless or galvanized steel only
  • Fire Glow stocks stainless steel caps that are painted black

Skirt Type Chimney Cover

Skirt Type Chimney Cover

Material choices: Aluminum, Stainless steel, or Copper. Sizes: Custom made. Features:

  • Covers are custom made to fit any chimney
  • Hood overhangs masonry approximately on al. sides
  • Skirt protects cement crown from deterioration due to weather
  • Eight stainless steel screws hold the cover securely onto the corners, exact measurements are needed for all four sides of the chimney, since there is no adjustment in the skirt base
  • Aluminum covers can be built to fit any size chimney. Most recommended for most applications
  • Stainless steel can be made for large sizes.
  • Braces are standard
  • Braces are available

METAL CHIMNEY CAPS

Liner Cap

Liner Cap

Material choices: Stainless Steel. Sizes: 6", 7", 8", 9", 11", 12" (other sizes need to be ordered). Features:

  • 100% 304 stainless steel
  • Completely assembled with welded construction
  • Liner cap easily mounted with 2" draw band and slotted hex-head bolts and nuts
  • Removable 18.75" gauge expanded stainless steel mesh
  • Stainless steel double-clamp draw band
  • 24 gauge single piece hood
  • 24 gauge base
  • 18 gauge braces

Selkirk Oil/Wood Chimney Cap

Selkirk Oil/Wood Chimney Cap

Sizes: 6", 7", 8", 10". Features:

  • 100% stainless steel
  • 6", 7", 8" caps designed to slide down over the outside of chimney with a cinch band to hold the top firmly in places.
  • 10" caps designed with squeeze collar that fits inside chimney pipe with set screw to secure place

ZC Fireplace Chimney Caps

ZC Fireplace Chimney Caps

Features:

  • Termination caps for select pre-fab fireplace chimney systems
  • FMI, Majestic, Heatilator
  • Galvanized steel
  • Double or triple wall
  • If you know fireplace make and model, measure diameters of each pipe (most systems consist of 2 pipes but some have 3). Fire Glow may be able to assist you with determining the proper cap for your chimney system.
  • Cooley caps--galvanized steel simple caps, round sizes
  • Most metal chimneys use that manufacturer's caps